Skip to main content

You are here

Lesson 1: Getting started

Question 1 of 4

Watch this video for an overview of the course and learning objectives.

Log in or register to post comments

59 comments

Given the lack of comments I suspect this is not an active tutorial but it is one of the bext tutorials I have found so far.

The only issue I had is that the offset procedure in the rabbit lesson kept coming back with an error about .5 and 1.2 being outside physical limits.

larry walker's picture

good

Introduction to CAD with Tinkercad and Fusion 360
17 lessons | 1 hour
Author: Jamie Billing
Software: Fusion 360, Tinkercad
Level: Beginner
Enrollment: 2097

iCourse Description

Lesson 1: Getting started

Step 1: Course overview

Step 2: Get the software

Step 3: Fusion 360 User Interface Update Overview

Step 4: Course resources

Lesson 2: Create a half sphere with keyring holder

Lesson 3: Hollow the new Pobble part and group with keyring holder

Lesson 4: Create duplicate parts, add holes, and custom text

Lesson 5: Export, download, and send to Fusion 360

Lesson 6: Autodesk Fusion 360 User Interface

Lesson 7: Create components, add chamfers, and fillets in Fusion 360

Lesson 8: Create and extrude custom text

Lesson 9: Create rabbet edges to join the components

Lesson 10: Measure and Section Analysis

Lesson 11: Create STL files for 3D printing

Lesson 12: Create technical drawings

Lesson 13: Assemble components and assign physical materials and appearances

Lesson 14: Create cloud renders

Lesson 15: Course challenge

Lesson 16: Course assessment

Lesson 17: Next steps

Step 1: Share your design work

Step 2: Get certified

Step 3: Give us feedback

This course is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.

Please see the Autodesk Creative Commons FAQ for more information.